LUBRICATION

OKS 671 
High performance chain spray

• High lubrication effect due to optimum product formula
  
• Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points
• Good lubricating and pressure absorption capacity
• Excellent corrosion protection

OKS 661
Rust dissolver and remover

• Chemical reaction – actively breaks down or dissolves rust layer
• Environmentally friendly formula – ecologically harmless in use
• Does not contain petrol or mineral oil – workplace-friendly
• Low evaporation rate – enhanced effect through longer exposure time
   

OKS 371 
Food grade maintenance spray

• NSF H1 registered
• Highly effective due to good creep properties
• Broad range of uses
• Displaces water
  
  
  
  
  
  
  
   

OKS 1110
Food safe silicone grease

• NSF H1 registered
• Highly effective due to excellent adhesion on all materials
• Neutral behaviour with regard to plastics and elastomers
• EPDM-compatible
• Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
• MOSH/MOAH-free
  

OKS 2611 
High performance universal cleaner

• Modern active cleaner on the basis of a solvent mixture
• Highly effective due to actively cleaning substances
• Better initial dissolving of soiling thanks for longer soaking-in period
• No formation of condensation on the material surface
• OKS 2610 is suitable for use with the OKS Airspray system

OKS 601
Multi oil spray

• Broad range of uses (6-fold action)
• Highly effective due to very good creep properties
• Also infiltrates strong oil and greasy soiling
• Good lubricating properties thanks to high oil percentage
• Displaces moisture
  
  
  
  
   

ROCOL
Leak Detector Spray

• Suitable for use with most positive pressure gas systems
• For use on pipework carrying natural gas and LPG
• Safe for use with refrigerant gases
• Non Corrosive
• Low Chlorine content
• 360 degree angle for use in difficult to reach areas

OKS 3711
Low-Temperature Oil for Food Processing Technology, Spray

• Suitable for use with most positive pressure gas systems
• For use on pipework carrying natural gas and LPG
• Safe for use with refrigerant gases
• Non Corrosive
• Low Chlorine content
• 360 degree angle for use in difficult to reach areas
  
  
   

OKS 3751
Adhesive Lubricant with PTFE, Spray

• For lubricating machine elements under high loads (also under water influence)
• The optimal additives allow good resistance to oxidation and ageing for long operating and durability
• Resistant to cold and hot water, steam and alkaline and acidic disinfectants and cleaning agents
  
  
  
  
   

OKS 481
Waterproof High-Pressure Grease for Food Processing Technology

• Fully synthetic calcium sulphonates complex grease
• Perfect for high loads and pressures at applications in the complete food processing technology
• Rolling and friction bearing lubrication, even at high temperatures
• Excellent wear protection and very good high-pressure properties
• Very high resistance to water-alkaline or acidic disinfectants and cleaning agents

• Simalube is a gas powered single-point automatic lubricator filled with 30, 60, 125 or 250 ml of grease or oil
• The patented hydrogen producing dry cell drives a piston to dispense lubricant at a consistent rate of between 1 and 12 months, which is adjustable in operation
• Gas production is initiated by turning the adjustment disk on the top with a hex key.

Visit the Products on the Webshop:

MOBIL SHC Gear Series 150/220/320/460

Features:

• Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
• Excellent resistance to degradation at high temperatures
• Low traction
• High viscosity index equating to reduced viscosity change with temperature
• Excellent resistance to rust and corrosion and very good demulsibility
• Excellent compatibility with common gearbox materials and with mineral-based gear oils

Advantages and Potential Benefits:

• Helps extend gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature
• Helps reduce unplanned downtime; less maintenance - especially critical for difficult-to-access gearboxes
• Helps extend oil life and drain intervals and reduce oil consumption, which can lower maintenance costs
• Helps reduce energy consumption and lower operating temperatures
• Ability to operate at both high and low temperatures: especially critical in remote applications with no oil cooling or heating
• Helps extend gear and bearing life
  
• Fewer filter changes; which can help reduce maintenance costs
• Less contamination and lower potential for oil leakage
• Easy changeover from many mineral products