ERIKS UK RSS News Feed
ERIKS IE

Housed Bearings

Housed Bearing Units
Housed bearings units (insert bearings) are basically deep groove ball bearings of series 62 and 63 which are sealed at both sides, have a convex sphered outside diameter on the outer ring, and have an inner ring - with the exception of two series - which is extended at one or both sides.

When mounted in appropriate housings to form housed bearing units, they are able to compensate for initial errors of alignment.

Simple and economic bearing arrangements can be made using the housed bearing units. Because of their special characteristics, housed bearing units are used in agricultural machinery, construction equipment, conveyor systems, textile machines and fans as well as in machines for food and beverage processing and packaging.
Housed Bearing Units
Housed bearing units do not permit axial displacement and are therefore unsuitable for non-locating bearing arrangements. The distance between bearing positions should thus be short, or the units should be attached to resilient sheet metal fabrications to prevent them from being subjected to excessive stressing, for example, as a result of thermal elongation of the shaft.

Copyright ©2019 ERIKS UK
All trademarks acknowledged.
All rights reserved.
Registered Office:
ERIKS Industrail Services (Ireland) Limited,
Unit 40, Finglas Business Centre,
Jamestown Road,
Finglas North, Dublin 11
Registered Number: 352795
Fenner is a registered trademark of J.H.Fenner & Co Limited.



NRS ID:352
Site Map